1 4

Wood Carved Bear with Fishing pole - 10" - Brown

Wood Carved Bear with Fishing pole - 10" - Brown

$199.99
$199.99
Sale Sold out

Low stock: 1 left

This chainsaw carved brown bear comes holding a fishing pole, and the pole can be swapped out with whatever you’d like. The paw has a 1/2" x 1.5" drilled hole, so people often put small flags or seasonal décor in there. Use your imagination.

It measures about 10x10x8 inches and is carved from heart-free Giant Sequoia Redwood. All of our wood is urban sourced and responsibly harvested. Using heart-free wood helps prevent the large cracks that run all the way through a carving. The darker features on the brown bears (paws, ears, nose) are lightly burned in. Each bear is finished with 3 coats of oil-based spar urethane so it can be displayed either indoors or outdoors.

Please note that due to the handmade nature of this product, there may be slight variations in size, shape, and color from the images shown. We work hard to keep them very close to the photo.

Approximate Dimensions

15" (H) x 8" (W) x 9" (D)

Care Guide

Indoor Care: It's sufficient to clean your carving by dusting it as needed. Rest assured that water won't cause any damage to it.

Outdoor Care: When it's time to refinish your carving, start by cleaning any dirt or debris off the surface. Then, cover the eyes with masking tape and apply 1-2 additional coats of oil-based spar urethane to protect the wood from the elements. Be sure to follow the manufacturer's instructions when applying the spar urethane.

Frequently Asked Questions

Q: Did you make this yourself?
A: Yes, we take pride in making our products ourselves in the USA!

Q: What kind of finish do you use?
A: We use 4 coats of satin oil-based Spar Urethane that is suitable for indoor and outdoor use.

Q: Can I leave it outside?
A: Yes, you can! Our 4 coats of Spar Urethane provide protection from weather. However, like any outdoor furniture, it will require some maintenance, especially if exposed to a lot of sunlight. If you notice the sculpture losing its shine, you can cover the eyes with masking tape and apply 1-2 more coats of Spar Urethane.

Q: How long have you been doing this?
A: We have been creating these sculptures since the early 70s. It's a family tradition that we're proud to continue.

Q: Will it crack?
A: We do our best to prevent major cracks, such as checking, which occurs when the sapwood (outer layer) shrinks around the heartwood (center) during the drying process. To avoid this, we rip the log into pieces and attempt to remove the heartwood. While smaller cracks may still occur, we strive to remove the heartwood from 99% of our products. If you receive a product with heartwood, don't worry, it's natural and won't affect its structural integrity.

Q: What tools do you use to carve your sculptures?
A: We use a variety of tools, including chainsaws, sanders, grinders, stones, routers, and more.

Q: Is the black burnt or painted?
A: Most of our sculptures are burnt at some point, which helps treat the wood and give it a smoother feel. The main parts of the carving are then painted, while features such as ears, nose, and paws are burnt on for added texture and detail.

View full details